CCL STRESSING INTERNATIONAL LIMITED

CCL

Machinery; Earthing Rods and Earthing Clamps, Cable Glands, Cable Connectors; and Insulating Conduits, All for Use with Electric Cables and Power Lines, Gauges for Testing and Measuring Stresses and Loads of Wires and Cables;Metal Goods; Electric Motors for Machines; Lifting Jacks and Pumps, Hydraulic Pre-Stressing Jacks, Motors for Activating Pre-Stressing Jacks, Pre-Stressing Beds and Stressing Units, Vibration Beds and Curing Beds, All for Use in the Production of Pre-Cast Concrete Fabrications; Machinery for Vibrating and Pre-Stressing Concrete in Moulds and in Forms; Screeding Machines; Power Operated Machines, All for Use in Vibrating and Compacting Concrete Masses and for Compacting Ground Surfaces of Building Areas; Power Operated Cutting Machines Incorporating Annealing Devices; Power Operated Hand Held Tools, and Flexible Drives and Grinding Attachments for Use Therewith; and Power Operated Presses (Machines) and Hand Operated Presses (Machines), Not Being for Printing;Splices for Making Up Wire Nets; Sockets, Sleeves, Loops and Thimbles, All for Wire Ropes; Fixing Bolts, Fixing Screws, Fixing Plates and Fixing Holders, All Being Fittings for Use with Pre-Cast Concrete Fabrications; Spacers, Thrust Rings, Anchor Plates, Locking Rings, Helex Springs, Connectors, Couplers, Joints, Sleeves, Clamps, Anchor Lugs, Line Taps, Loop Stirrups, Cable Socks, Cable Rollers, Cable Blocks, All Being Non-Electric and for Use in Connection with Overhead Cables and with Stressed Cable Constructions; Ducts, Formers, Sheathing, Bearing Plates, Anchoring Strand Processing Machinery Used in Installing Concrete Engineering Structures, Compression Grips, Wedge Grips, and Mechanical Gripping Connector Sleeve (Not Being Hand Tools), All Being Articles for Use with Apparatus and Installations for Pre-Stressing and Post-Tensioning Concrete Fabrications for Use with Engineering Structures, All of the Foregoing Being Made of Metal;

CCL

Metal treatment; metal fabrication services, namely, the mechanical joining of metal products;The mark consists of the lower case letters ccl in white against a 4-sided geometric shape, with a white and gray arc below the letters, the 4-sided geometric shape being black above the arc and gray below the arc.;Hand operated tools in the nature of electronic instrumentation for the measurement of forces, strength, and corrosion in concrete structures; gripping and locating devices, namely, anchorage connectors for use in supporting workmen in the course of operations on overhead cables for the purpose of pre-stressing and post-tensioning civil engineering structures and other engineered structures; power operated hand held tools, namely, measurement devices;Hand operated hydraulic presses for use in civil engineering construction or the construction of other engineered structures; hand operated jacks, hand tools, and parts thereof, namely, hydraulic jacks, saws and clippers for cutting tensing elements and wire, and hand-operated hydraulic pumps, all for use in civil engineering construction or the construction of other engineered structures, and for use with strands, wires and with cables; hand operated pumps and parts therefor, for use in civil engineering construction or the construction of other civil engineered structures, and for lifting engineered structures and tensile bars;Rubber and elastomeric bearing pads and strips, all for use in engineered structures, namely, buildings and bridges;Electric, hydraulic, and power lifting jacks and pumps, all for use in civil engineering construction or the construction of other engineered structures; machines for use in the mixing and setting of concrete and of colloidal mixes, namely, concrete mixers, concrete mixing trucks and portable concrete mixers for on-site use; machines for vibrating and pre-stressing concrete in moulds and in forms; power operated machines and power operated apparatuses, all for use in vibrating and compacting concrete masses and for compacting ground surfaces of building areas; power operated pushing machines for use with wire ropes, strand and other steel tensile elements; power operated cutting machines incorporating annealing devices, and for use with wire ropes; power operated hand held tools, namely, hydraulic jacks, saws and clippers for cutting tensing elements and wire, hydraulic pumps for use in civil engineering construction or the construction of other engineered structures, and flexible drives and grinding attachments for use therewith; power operated industrial machine presses for use in civil engineering construction or the construction of other engineered structures, none being for printing; motors other than for land vehicles for use with all the aforesaid goods; machines for the production of hollowcore pre-cast units for use in pre-stressed concrete in the construction field; machines for curing of concrete, namely, by water heating systems and electrical heating elements;Construction materials made wholly or principally of common metal for use with wire ropes, cables, and slings for lifting precast concrete fabrications, namely, splices for connecting reinforcing bars for use in concrete columns, splices for making up wire nets, anchor sockets that form part of a concrete element, sleeves, namely, junction sleeves for non-electric cables, loops and thimbles, fixing bolts, fixing screws, fixing plates, and fixing holders; metal moulds for forming concrete fabrications, namely, ducts, formers, spacers, sheathing, thrust rings, bearing plates, anchor plates, locking rings, helix springs, anchorage castings, compression grips, wedge grips, and mechanical gripping devices, not being hand tools or machines; metal hardware for use in connection with non-electric overhead cables and with stressed cable constructions, namely, connectors, couplers, joints, sleeves, clamps, anchor lugs, line taps, loop stirrups, cable socks, cable rollers, cable blocks; industrial metal high pressure hose and fittings therefor; metal mechanical bearings other than parts of machines for use in the pre-stressing and post-tensioning of engineered structures;The construction, maintenance and repair of civil engineering structures and other engineered structures, namely, residential buildings, commercial buildings, office buildings, mixed use buildings, arts, cultural and entertainment buildings, educational facilities, health facilities, worship buildings, hotels, car parks, historic monuments, museums, bridges, subways and railways, nuclear power stations, oil drilling facilities, factories, warehouses and industrial facilities, power stations, containment structures, wind turbines, road underpasses and overpasses, soil structures, marine structures including ports, marinas, and dams, tanks for gas, oil, water, and waste, shopping malls, government buildings, law enforcement buildings, military buildings and structures, airports and transport stations; the mechanical joining together of strand reinforcing bars predominantly used in reinforced concrete structures; stressing of concrete; construction, maintenance and repair of pre-cast concrete plants, namely, pre-cast and pre-stressed concrete factories; engineering services, namely, repair of engineered structures;The color(s) black, gray, and white is/are claimed as a feature of the mark.;Pre-stressing beds, stressing units, and vibration beds, namely, heat stress machines having temperature controlled ceramic heating elements for heating tubes, pipes, and welds, all for use in the production of pre-cast concrete fabrications;Engineering design services; engineering services, namely, structural investigation of engineered structures; design of pre-cast and pre-stressed concrete factories, including software design;

SIGMASLAB

Concrete; concrete building elements, namely, concrete floors, pillars, and slabs; floors, not of metal; pillars, not of metal, for building; slabs, not of metal, for building;Anchors; metal anchor plates and tie plates in the nature of reinforcing materials of metal for building; bolts of metal; cables of metal, non-electric; steel wire; reinforcing materials of metal for building; reinforcing materials of metal for concrete; ropes of metal; non-electric wires of common metal; wire rope; wire stretchers being tension links of metal;Construction, maintenance and repair of civil engineering structures and other engineered structures, namely, concrete slabs, concrete flooring, and concrete pillars that combine fiber reinforcement and post-tensioning; installation of strand reinforcing bars, namely, joining together of strand reinforcing bars predominantly used in reinforced concrete structures;Provision of advisory services in the field of concrete structure design, in particular regarding the combination of fiber reinforcement and post-tensioning for concrete structures for use by others in the design of engineered structures, namely, concrete slabs, concrete flooring, and concrete pillars;

SPIROLL

(Based on 44(e)) Training, namely, training in the field of concrete stressing, software training, extruder and saw operator training; training services relating to health and safety, namely, training in the safe use of construction machinery and training in relation to general site awareness within a precast concrete facility; publication of manuals;(Based on Use) Manufacturing of concrete; production of pre-cast concrete plants, namely, custom manufacture of pre-cast concrete plants; information and advisory services relating to all the aforementioned services; technical support services, namely, providing technical advice related to the manufacture of concrete plants and providing technical advice related to the manufacture of concrete elements;(Based on 44(e)) Concrete; Concrete slabs; slabs, not of metal, for building; hollowcore concrete slabs;(Based on 44(e)) Construction machines, namely, extrusion and casting machines; concrete construction machines; machines for mixing, conveying and processing building materials; machines for hollowcore concrete production; combined skips and mixers for producing concrete; machinery and apparatus for use in the moulding of concrete, namely, concrete moulding machines; machinery and apparatus for use in stressing concrete, namely, concrete stressing machines; electric pumps; machine pumps; pumps for machines for stressing; pre-stressing beds, namely, machines for stressing, curing, forming and extruding concrete elements; cutting machines for tensile elements and concrete; power jacks; power jacks for stressing; power-operated saws; cleaning machines for cleaning concrete construction machinery; structural parts and fittings for the aforesaid goods; machines for curing of concrete by various methods;(Based on 44(e)) Stressing of concrete; repair and maintenance of machinery; construction project management services; information and advisory services relating to all the aforementioned services; technical support services, namely, providing technical advice related to the maintenance and repair of concrete plants and providing technical advice related to the maintenance and repair of concrete elements; information and advisory services in the field of construction and maintenance of precast and pre-stressed concrete plants and associated machinery;(Based on 44(e)) Design and development of machinery; technical support services, namely, providing consultation in the design and development of concrete plants and advice on the design and development of concrete elements; new product design relating to the construction and maintenance of precast and pre-stressed concrete plants and associated machinery; technical support in the nature of providing technological advice to third parties in the field of manufacturing technology, as they develop proposals for jobs involving manufacturing, maintaining and repairing turn-key precast factories;