THREE COMPONENT POLYURETHANE RESIN FLOOR

Brand Owner Address Description
PURCEM SIKA AG, VORM. KASPAR WINKLER & CO. Tuffenwies 16-22 8048 Zurich Switzerland three component polyurethane resin floor screed; concrete; mortar; plaster material, namely, plaster and stucco; cement and cement mixes for the construction industry;seals used for expansion gaps and construction joints; sealing compounds used for sound and moisture prevention in the building and manufacturing industries; moisture insulating materials, namely, polyurethane film for use as a moisture barrier used in the building industry; laminated plastic sheets for use in the manufacture of countertops; waterproof plastic sheeting used for roofing and tunneling;chemical products, namely, compounds and admixtures used for sealing, insulating and filling in the building and manufacturing industries; admixtures for concrete and mortars; binding agents in the nature of chemicals and admixtures for use in the building and manufacturing industries; sealing and insulating materials, namely, chemical compounds and admixtures used for the building and manufacturing industries; gap filling compositions, namely, chemical compounds and admixtures used for the building and manufacturing industries;
 

Where the owner name is not linked, that owner no longer owns the brand

    
Technical Examples
  1. An aqueous resin composition satisfying the following criteria (I)-(III). (I) The aqueous resin composition contains (a) an aqueous dispersion of a polyurethane resin obtained from a macromolecular polyol, organic polyisocyanate, chain extending agent and 2,2-dimethylolbutanoic acid, and, if required, (b) an aqueous dispersion of an acrylic resin. (II) When the resin comprising this aqueous resin composition contains mainly a polyurethane resin, the inherent viscosity (?inh) of the polyurethane resin measured at a concentration of 0.5 g/dL in dimethylformamide solution is in the range of 0.2-0.7 dL/g. After this aqueous resin composition is dried, the elastic modulus at 25° C. of the film obtained by heat treatment at 80° C. for 8 hours is in the range of 8.0×10